Company Address
No. 6668, Section 2, Qingquan Road, Qingbaijiang Dist., Chengdu, Sichuan, China
●Product Parameters
| MODEL | MIG-350 | MIG-500 | MIG-630 | MIG-1000 |
| Rated Input Voltage(V) | 3P 380V | 3P 380V | 3P 380V | 3P 380V |
| Frequency(Hz) | 50/60 | 50/60 | 50/60 | 50/60 |
| Max Input Current(A) | 23.3 | 43 | 60 | 105.5 |
| Rated Input Capacity(KVA) | 15.5 | 27.5 | 39.8 | 69.4 |
| No-Load Voltage(V) | 68 | 72 | 78 | 72 |
| Adjustment Current range(A) | 40-350 | 40-500 | 40-630 | 40-1000 |
| Rated Working Voltage(V) | 32 | 39 | 44 | 44 |
| Duty Cycle(%) | 60 | 60 | 60 | 80 |
| MMA function | YES | YES | YES | YES |
| Wire Feeder | separated type | separated type | separated type | separated type |
| Wire Diamter(MM) | 0.8/1.0/1.2 | 1.0/1.2/1.6 | 1.0/1.2/1.6 | 1.6/2.0/2.8 |
| Protection classification | IP21S | IP21S | IP21S | IP21S |
| Net Weight (KG) | 30.9 | 39.15 | 45 | 85 |
| Machine Dimensions(MM) | 540x260x490 | 620x390x330 | 650x310x600 | 685x360x965 |
●Protective equipment
● To prevent gas poisoning and asphyxiation,dust poisoning and other hazards,please use exhaust
equipment or respiratory protection gears as required.
● When welding or supervising welding,use safety goggles or protective gears with sufficient light shade.
● To protect your eyes from spatter and welding slag,wear protective spectacles.
● Wear leather gloves,long-sleeved clothes,foot protectors,aprons,and other protective gears.
● Set up a protective barrier around the welding place to prevent the arc light from injuring others.
● When the noise is loud, please use sound insulation apparatus.
● Use ventilation fan to change the air or take wind protection measures when it is windy outside to prevent the wind from blowing directly on the electric arc to cause poor welding.
●Operating methods
1) After correct installation,turn on the power switch and push the power switch in the "ON" position. Then，the power indicator light will be on and the fan inside the welder will start rotating.
2) Open the valve of the gas bottle and adjust the flowmeter to the desired flow rate.Select the torch contact tube aperture according to the wire diameter.
3) According to the thickness of the workpiece to be welded and the welding technology,match the "voltage adjustment" knob and the "current adjustment"knob to the corresponding positions.
4) The "inductance adjustment" knob can change the softness and hardness of the arc,and can be regulated to the appropriate position as needed.
●Selection of welding current and voltage
The selection of welding current and arc voltage directly affects the stability of the welding process, welding quality and productivity. In order to ensure the weldingquality, a good match between welding current and arc voltage is required. The selection is usually based onthe wire diameter and the required drop transfer and productivity.
No. 6668, Section 2, Qingquan Road, Qingbaijiang Dist., Chengdu, Sichuan, China
+86 13587752681