TIG DC PULSE TIG

TIG-200P/TIG-205P/TIG-250P TIG WELDER DC PULSE TIG

● Description

● DC INVERTER

● Overheat, overcurrent protection

● PULSE TIG/MMA

● 5 pin foot pedal welcome: control amper up/down

Request A Quick Quote

Product Parameters

TECHNICAL DATA
KG Model	TIG-200P	TIG-250P
Rated Input Voltage	1PH 220V	1PH 220V
Input Capacity	36KVA	42KVA
Inverter Frequency	40KHz	40KHz
OCV	60V	60V
Duty Cycle	30%	30%
Current Range	TIG：10-200 MMA：20-160	TIG：10-250 MMA：20-200
Electrode Diameter	/	/
Tungsten Diameter	1.6-2.4	1.6-3.2
Efficiency	83%	83%
Protection Class	IP21S	IP21S
Machine Dimension	400165295mm	400165295mm
Machine Weight	5.4KG	5.5KG

Product Characteristics

The TIG 200P/250P DC Pulse Digital Argon Arc Welding Machine is a modern inverter argon arc welding device with full digital control. It enables you to work with direct current (for welding of steel, copper, titanium, etc.). The TIG 200P/250P is specifically designed for the following welding methods: manual arc welding with coated electrodes (MMA), non-contact arc ignition direct arc welding (TIG DC HF), and direct arc welding with arc excitation through a contact tungsten electrode (TIG DC LIFT START). The pulse welding mode significantly reduces the heat input to the welding components, allowing you to handle thin-walled metals. This setting allows you to save the settings of the set welding parameters and reproduce them when necessary.

	2-IN-1 VERSATILITY
	Due to its multi-functional nature and the ability to switch between two welding modes, this machine enables you to perform the following types of work: direct current argon arc welding (TIG AC) and manual arc welding using coated electrodes (MMA).
	OVERHEAT PROTECTION
	Overheat protection.
	OVERLOAD PROTECTION
	Undervoltage, overvoltage, overcurrent Protection
	EXTENDED EQUIPMENT
	Welding torch, welder's protective cover, brush, air hose, fixture, spare parts kit - This kit contains everything needed for a quick start of work.
	FOOT PEDAL
	Enjoy hands-free, real-time control over your welding amperage. Easily increase or decrease power with your foot for precise welding adjustments.

Advantages

IGBT inverter efficiency; thermal/current protection; pulse TIG thin welding; MMA heavy-duty; single-machine versatility.

Key Features

Inverter-based TIG series using 20-30kHz IGBT tech; compact, energy-saving. Multifunctional: WSM, DC TIG, pulsed TIG. Precise slow-start/decay control; superior arc stiffness & HF ignition success.

System Specs

60% duty cycle at max output; constant current characteristic. Exceeding cycle risks overheating and damage.

Setup Rules

Avoid dust/metal powder, corrosive gas. Op. temp: -10°C~40°C; storage/transit: -25°C~55°C. Max 15° tilt. Dry & ventilated (<90% RH), no sun/rain. Windshield weld zone. ≥20cm wall clearance; ≥30cm machine spacing.

01020304

Accessories