MULTIFUNCTIONAL PULSE TIG/CUT/MMA

TC-200TP MULTIFUNCTIONAL PULSE TIG/CUT/MMA

● Description

PULSE TIG / CUT / MMA 3 IN 1

PULSE TIG:200A:CUT:50A:MMA:180A

Torch cut,quality cut 10mm, max cut 18mm

Request A Quick Quote

product Parameters

TECHNICAL DATA

KG Model	TC-200TP
Rated Input Voltage	1PH 220V
Input Capacity	9.2KVA
Inverter Frequency	40KHz
I1max/max input amper	42A
Output Volt	MIG: 16-24V: MMA: 20.8-27.2V HF TIG: 10.6-18V; CUT: 88-100V
Real Current Range	MIG: 40-200A: MMA:20-180A: HF TIG: 15-200A; CUT: 20-50A
Duty Cycle	30%
OCV	60V
Recommend Electrode Diameter	0.8/1.0mm
Efficiency	83%
Insulation Class	F
Working Temperature	-10~+40°C
Input power cable	2.5mm²
Power switch	30A
Output welding cable	25mm²
Machine Dimension	490205365mm
Net Weight	8.2KG

Product Characteristics

Experience the 3-in-1 multi-functionality of this compact welding machine and plasma cutter. It integrates Pulse TIG, MMA and non-touch CUT in one unit, providing powerful performance for professionals and DIY users.

	3-IN-1 VERSATILITY
	Due to its versatility, this machine enables you to perform the following operations: manual arc welding (MMA) using direct current and coated electrodes, pulsed submerged arc welding, and cutting functions.
	2-IN-1 VERSATILITY
	A variety of welding gun operation modes are available for selection, allowing welders to choose the optimal and convenient welding control algorithm and set the time, intervals, and other parameters of the welding process. The TC-200 model enables you to select two different torch control modes: 2T - Press the trigger to start the welding process and ignition, release the hammer to stop the welding arc; 4T - Press - Release the trigger, start the welding process, press again - Release the trigger, complete the welding process. This is convenient for welding long weld seams, and the welder does not need to hold the welding gun button throughout the process.
	PULSE MODE
	The PULSE mode simplifies the welding process for aluminum, aluminum alloys, and stainless steel, ensuring a high level of connection reliability. Unlike short circuits, pulse welding does not produce spatter and prevents adhesion. The quality and convenience of the pulse process enable inexperienced welders to weld welds of different complexity levels. The pulse mode of alternating current and direct current can be used to weld high-quality thin-walled stainless steel and aluminum products.
	REMOTE CONNECTOR
	The remote foot pedal switch can adjust the welding current in real time and continuously. During operation, the force applied by the foot controls the output power: a light press generates a small current for arc starting/melt pool control, a heavy press increases the current to enhance the depth of fusion, and releasing the foot causes the current to decrease and the arc to extinguish. This design frees both hands to achieve precise heat input management, especially suitable for thin plate welding, complex position operations, and fine workpieces that require continuous adjustment, significantly improving weld quality and operational flexibility.

Advantages:

● PULSE TIG / CUT / MMA 3-IN-1

→ Precision Multi-Process Platform:

PULSE TIG: High-frequency pulse welding with 200A peak current for aerospace-grade aluminum/stainless fabrication.

Plasma CUT: Non-contact arc ignition for oxidation-free severance of conductive metals.

MMA: 180A hot-start capability.

● TORCH-BASED PLASMA CUTTING

→ Handheld Precision Technology:

Drag Cutting： Contact-tip guidance for smooth 10mm cuts.

Max. Penetration: 18mm bevel-free severance with compressed air .

Pilot Arc: Maintains stability through painted/rusted surfaces.

Features and Characteristics：

● Multi-process capability - Integrated machine tool:

Built-in hot start, arc force (adjustable) and Anti-Stick joystick (SMAW)
HF DC TIG can achieve clean and precise welding, using non-contact arc start
HF DC pulse TIG can achieve better heat control, very suitable for thin metals and heat-sensitive metals
Spot welding mode has adjustable spot welding time, enabling fast and repeatable welding
Plasma cutting (CUT) technology using high-frequency non-contact arc ignition

● Digital display:

The high-definition digital screen provides real-time feedback on amperage, voltage and selected modes.
It simplifies the workflow and enhances control.
The intuitive interface is specifically designed for users of all skill levels.

● REMOTE CONNECTOR:

The TIG welding mode supports foot pedal control, which is used for activating the welding and adjusting the amperage.

During the connection process, the pedal will be automatically recognized, and no manual settings are required.

It is highly suitable for precise TIG welding, long weld seams or environments with restricted positions.

● Plasma cutting:

20 - 50A adjustable cutting current
Clean cutting: 10V 5/16 inch (8 mm), 220V 1/2 inch (12 mm)
Maximum cutting: 1/2 inch (12 mm) 110V, 3/4 inch (20 mm) 220V
Use safe compressed air
Support cutting of steel, stainless steel, aluminum, copper, etc.
Equipped with HF non-contact arc starting and adjustable pre-flow/post-flow gas control for protecting the torch tube

TC-200TP MULTIFUNCTIONAL PULSE TIG/CUT/MMA

Advantages:

Features and Characteristics​：

Features and Characteristics：