• Home
  • Products
  • MIG
    • Synergic multi process mma mig tig gas gasless CO2 welding machine
    • Synergic multi process mma mig tig gas gasless CO2 welding machine
    • Synergic multi process mma mig tig gas gasless CO2 welding machine
    • Synergic multi process mma mig tig gas gasless CO2 welding machine
    • Synergic multi process mma mig tig gas gasless CO2 welding machine
    • Synergic multi process mma mig tig gas gasless CO2 welding machine
    • Synergic multi process mma mig tig gas gasless CO2 welding machine
    • Synergic multi process mma mig tig gas gasless CO2 welding machine
    MIG-200

    Synergic multi process mma mig tig gas gasless CO2 welding machine

    Product Details

    ● Product Parameters

    Model MIG-165 MIG-185 MIG-205 MIG-205K MIG-250K
    Rated Input Voltage 1P 220V 220V/380V 220V/380V
    220V 380V 220V 380V
    Rated Input Power(KVA) 5.6 6.6 7.5 8 10
    Rated Input Current(A) 26 30 35 34 23 40 23
    No-Load Voltage(V) 52 62 58 62 54 54 54
    Rated Output(A/V): MIG 1 50/21 1 80/22 200/23 200/24 250/26
    Rated Output(A/V): MMA 1 50/25.6 1 80/26.4 200/27.2 200/28 250/30
    Duty Cycle (%) 50 50 60 50 50
    Wire Weight(kg) 1/5 1/5 5 1/5 5/15
    Wire Diameter(mm) 0.8-1.0 0.8-1.0 0.8-1.0 0.8-1.0 0.8-1.2
    Insulation Class IP21S IP21S IP21S IP21S IP21S
    Power Factor 0.8 0.8 0.8 0.8 0.8
    Efficiency(%) 80% 80% 80% 80% 80%
    Machine Dimension (MM) 425*200*355 425*200*355 530*310*500 425*200* 355 490* 245*415
    Net Weight(KG) 8.9 9 11.2 9.5 15

    ● Work Environment.

    (1) The environment should be dry and the air humidity didn't exceed 90%.
    (2) Temperature should be from-10℃ to 40℃.
    (3) Avoid welding under rain or hot sunshine, don't let water or rain into machine.
    (5) Avoid using the machine under strong air flow.
    (4) Don't work under dust area or aggressive fume.

    ● Safe tips

    The machine is equipped with over voltage, over current and overheat protection device. If the voltage, output current and temperature exceed the standard, the machine will stop working. Besides, overusing the machine based on exceeded voltage, the machine will be damaged,, so please kindly note as below

    (1) Ensure Good Airiness.

    During the working, the machine will generate high temperature and it needs help from fan to cool the
    machine. So users please make sure the ventilation inlet is not stuck or covered. Meanwhile, keep the
    objects around the machine in a distance of no less than 0.3m. Keeping airiness helps to lower the
    temperature more quickly and ensures a longer service life of the machine.

    (2) Current Overloading Prohibited

    Close attention should be paid to the permissible loading current(the available duty cycle) to ensure
    the welding current being under maximum permissible current. Current overloading shortens service life of a machine greatly, or even damages the machine.

    (3) Earth cable connects to the ground. There is a mark near the earth screw on the back panel Before using the machine, please choose a wire (cross sectional area above 6 mm2) to connect the earth screw to ground to avoid electricity leakage accident and release static electricity.

    (4) No overload of the standard rated duty cycle. When it overloads the standard, the machine will stop working due to overheat inside of machine. After stopping and resting for some time, the machine can be started to work again.