RSN(HEAVY INDUSTRY)
RSN-2500X/RSN-2500/RSN-3150 STUD SERIES PULL-ARC
● Description
● DC INVERTER
● Pull-Arc STUD
● For stud more than M13
| Model | RSN-2500X | RSN-2500 | RSN-3150 |
| Input Power Source | 3P 380V | 3P 380V | 3P 380V |
| Rated Input Capacity(KVA) | 97 | 121 | 153 |
| Rated input current(A) | 147 | 185 | 214 |
| No-Load Voltage(V) | 90 | 108 | 108 |
| Maximum length of ground cable(M) | 30 | 30 | 30 |
| Duty Cycle(%) | 15 | 15 | 15 |
| Current adjustment range(A) | 300-2000 | 300-2500 | 300-3150 |
| Weldable stud diameter(MM) | 6-19 | 10-25 | 16-32 |
| Welding time | 0.3-3 | 0.3-3 | 0.3-3 |
| Stud length | ≤400 | ≤400 | ≤400 |
| Efficiency | 90% | 90% | 90% |
| Insulation Class | IP21S | IP21S | IP21S |
| Dimensions(MM) | 690X390X760 | 680X355X960 | 750X445X1040 |
| Weight(KG) | 75 | 105 | 115 |
The stud welding machine has strong power, safe and easy operation, and can also realize short-cycle drawn-arc stud welding and long-cycle drawn-arc stud welding. It can weld various components such as ordinary studs, T-shaped studs, pins, balls, etc.The welded joints are firm and safe, and there is no high requirement for the accuracy and tip quality of the studs. It is especially suitable for oily, rusty, galvanized surfaces. or other coated workpieces.The stud welding machine is very time and cost saving, all stud welding constructions do not need drilling, punching, threading, riveting, threading and finishing steps. Welding torches continue to expand the application potential of structural design. In stud welding, the welding process is short in time, high in current and low in penetration.Therefore, it can be welded to thinner sheets. Workpieces for stud welding must be welded from one side. Capable of welding in all positions, connected to restricted vertical bulkheads with the aid of extenders.
Env.Specs
Operates -10°C to 40°C, store/transport -25°C to 55°C. Place dry ventilated. Input 220V/380V/480V 50Hz, voltage tolerance ±10% or ±20%. Generator requires 1.5x rated power and compensating coil.
Advantages
KeyFeatures
IGBT inverter tech enables digital-controlled MIG/MMA welding. Supports CO2/MAG/MIG gases for mild/stainless steel. Solid/flux-cored wire compatible.
SystemSpecs
60% duty cycle: max working ratio per 10min. Overuse causes overheating. CV output for gas welding, CC for manual welding.