PLASMA CUTTER HF AIR BUILT IN

CUT-50AIR PLASMA CUTTER HF AIR BUILT IN

● Description

● DC INVERTER
● High frequency arc rising
● CUT / MMA 2 IN 1
● After blow time adjustable
● 2T /4T
● built-in Air/outer Air switch knob
● Capable to cut all metals
● Quality cutting thickness:10mm
● Max thickness: 15 mm

Request A Quick Quote

Product Detail

TECHNICAL DATA
KG Model	CUT-50AIR
Rated Input Voltage	1PH 220V
Rated Input Capacity	7.8KVA
Real output Amper	CUT: 40A; MMA: 160A
Inverting Frequency	/
OCV	380v
Duty Cycle (40°)	40%
Arc Method	HF, touch
Power Cooling Method	Forced Air Cooling
Quality Manual Cutting Thickness	CS:10mm SS:10mm AL:10mm
Max Manual Cutting Thickness	CS: 15mm SS:15mm AL:15mm
Electrode Diameter	10/carbon steel
Efficiency	15/carbon steel
Protection Class	IP21S
Input Power Cable Diameter	≥4mm²
Output Power Cable Diameter	16mm² CCA
LxWxH	410230290mm
Net Weight	13.5KG

Env. Specs

Works in -10°C~40°C; requires dry, ventilated area with 20cm/30cm clearances for cooling. Avoid dust, moisture, and corrosive environments.

Advantages

Versatile 2-in-1 plasma cutter/Welder with stable arc/Easy ignition/ Precision cuts up to 15mm on all metals.

Key Features

IGBT inverter plasma cutter with programmable currents/ Soft-start/CNC support ensures stable/Precise cuts on steel, aluminum

System Specs

60% duty cycle with CC output for steady cuts; prolonged overuse causes damage.

01020304

products Characteristics

The CUT-50Air is a multifunctional modern power source with a built-in compressor, which is widely used in the cutting of carbon steel, stainless steel, aluminum alloys and other metals. CUT-50Air allows you to cut steel up to 15 mm thick. The device also provides an additional mode of welding with MMA piece electrodes. The built-in filter regulator allows you to adjust the compressed air pressure and dry/clean the air supplied by the compressor to the plasma arc area during operation. 2 digital displays on the front control panel show the set cut/weld current and mains voltage.

	2-IN-1 VERSATILITY
	In addition to the main CUT plasma mode, the model also has an additional MMA manual arc welding mode, which allows you to weld products with piece electrodes.
	2T / 4T MODE
	Push-pull mode is suitable for short cuts: when you hold the button on the plasma torch, the cutting process begins, when released, it ends. The four-stroke mode is designed for long cuts: when you press and release the button for a short time, the cutting process begins, when you press and release it again for a short time, it ends.
	2 DIGITAL DISPLAYS
	There are 2 digital displays on the front control panel. One displays the set values of the cutting or welding current, the other displays the values of the voltage in the network.
	POST-PURGING OF THE PLASMA TORCH
	Purging with compressed air after the completion of work increases the service life of the plasma torch components.

Advantages:

Versatile 2-in-1 plasma cutter/welder with stable arc, easy ignition, and precision cuts up to 15mm on all metals.

Features and Characteristics:

IGBT inverter plasma cutter with programmable currents, soft-start, and CNC support ensures stable, precise cuts on steel, aluminum, and more, optimizing energy use and consumable life.

System Characteristics:

60% duty cycle with CC output for steady cuts; prolonged overuse causes overheating/damage.

Operating Conditions & Environment:

Works in -10°C~40°C; requires dry, ventilated area with 20cm/30cm clearances for cooling. Avoid dust, moisture, and corrosive environments.

Acceessories

cut50air-1

Accessories
2.5m power cable(3*2.5mm ²)
3M PT-31 CUT torch (M16*1.5 with 2-wire aviation plug)
3m electrode cable(20mm ²)
200A holder
2m earth cable(20mm ²)
300A clamp
Air reducer with a bracket for fixing
3m gas hose
Hose clamp
Manual